tb公式想改文華wh8
作者：文華財經 來源：cxh99.com 發布時間：2018年09月02日
-
咨詢內容：
?
ParamsNumeric Length1(88); //均線
Numeric LEntry(25); //進場M根K線最高點
Numeric LSell(48); //進場n根K線最低點
Numeric StopPCT(0.1); //固定比例止損
Numeric FixXIELV(27); //斜率界定
Numeric FixJump(1);
? ? Numeric TrailingStart1(10); // 跟蹤止損啟動設置1? ? Numeric TrailingStop1(10); ?// 跟蹤止損設置1
? ? Numeric TrailingStart2(100); // 跟蹤止損啟動設置1? ? Numeric TrailingStop2(60); ?// 跟蹤止損設置1? ??? ? Numeric KaiD(-20);?? ? Numeric KaiK(-40);?
vars
Numeric XIELV; //MA斜率，用于過濾
NumericSeries MA1; //MA均線，用于過濾信號? ? ? ? ? ??
NumericSeries ShortStop; ? ? ? ? ? ?
NumericSeries LongStop;
NumericSeries EntryHi; ? ? ? ? ? ? ?
NumericSeries EntryLo; ??
NumericSeries SellHi;
NumericSeries SellLo; ? ? ? ? ? ? ??
NumericSeries TradeNum;
//記錄信號開始天數
Numeric MinPoint; ? ? ? ? ? // 一個最小變動單位，也就是一跳? ? Numeric MyEntryPrice; ? ? ? // 開倉價格，本例是開倉均價，也可根據需要設置為某次入場的價格? ? Numeric MyExitPrice; ? ? ? ?// 平倉價格
? ? NumericSeries HighestAfterEntry; ? ? ? ?// 開倉后出現的最高價? ? NumericSeries LowestAfterEntry; ? ? ? ? // 開倉后出現的最低價
begin
MinPoint=MinMove*PriceScale;
//Length1均線
MA1=Summation(Close,Length1)/Length1;
PlotNumeric("MA1",MA1);
//入場點，開多和開空點，突破LEntry天最高或最低
EntryHi = Highest(high[1],LEntry);
EntryLo ?= Lowest(low[1],LEntry);
//離場點，止盈點，LSell天較高或較低
SellHi=Highest(high[1],LSell);
SellLo= Lowest(low[1],LSell);
if (BarStatus==0 || TradeNum >=3)
{
TradeNum = -1;
}
if(Time!=Time[1] && tradenum>=0)
{
TradeNum = TradeNum[1]+1;
}
? ? If(BarsSinceentry == 0)? ? {? ? ? ? HighestAfterEntry = Close;? ? ? ? LowestAfterEntry = Close;? ? ? ? If(MarketPosition <> 0)? ? ? ? {? ? ? ? ? ? HighestAfterEntry = Max(HighestAfterEntry,AvgEntryPrice); ? // 開倉的Bar，將開倉價和當時的收盤價的較大值保留到HighestAfterEntry? ? ? ? ? ? LowestAfterEntry = Min(LowestAfterEntry,AvgEntryPrice); ? ? // 開倉的Bar，將開倉價和當時的收盤價的較小值保留到LowestAfterEntry? ? ? ? }? ? }else? ? {? ? ? ? HighestAfterEntry = Max(HighestAfterEntry,High); // 記錄下當前Bar的最高點，用于下一個Bar的跟蹤止損判斷? ? ? ? LowestAfterEntry = Min(LowestAfterEntry,Low); ? ?// 記錄下當前Bar的最低點，用于下一個Bar的跟蹤止損判斷? ? }
Commentary("MAID:"+Text(((High -MA1[1])*10000/MA1[1])-FixXIELV));
Commentary("MAIK:"+Text(((Low -MA1[1])*10000/MA1[1])-FixXIELV));
if(MarketPosition ==0 and TradeNum<0 )
{
If( high>EntryHi ?&& (((High -MA1[1])*10000/MA1[1])-FixXIELV) >KaiD )////CrossOver(high,EntryHi) ? ? high>MA1 &&
{
TradeNum = 0;
myEntryPrice = min(high,EntryHi );
myEntryPrice = IIF(myEntryPrice < Open, Open,myEntryPrice);?
Buy(0,myEntryPrice+FixJump*MinPoint);
//止損點，兩天較低
//LongStop=low[1];
LongStop=Max(Highest(low[1],2),myEntryPrice*(1-StopPCT/100));
}
If( Low<EntryLo ?&& (((Low -MA1[1])*10000/MA1[1])+FixXIELV)< KaiK) //// ? ?CrossUnder(Low,EntryLo) ?low <MA1 ?&&
{
TradeNum = 0;
myEntryPrice = max(low,EntryLo ?);
myEntryPrice = IIF(myEntryPrice > Open, Open,myEntryPrice);?
SellShort(0,myEntryPrice-FixJump*MinPoint);
//止損點，兩天較高
ShortStop= Min(Lowest(high[1],2),myEntryPrice*(1+StopPCT/100));
?
}
}
??
??
If(MarketPosition ==1)
{
if (BarsSinceEntry>0 && Low<LongStop)
{
myExitPrice = max(low,LongStop );
myExitPrice = IIF(myExitPrice > Open, Open,myExitPrice);
Sell(0,myExitPrice-FixJump*MinPoint);
}else if (BarsSinceEntry>0 && Low<SellLo) //(XIELV<0)
{
myExitPrice = max(low,SellLo );
myExitPrice = IIF(myExitPrice > Open, Open,myExitPrice);
Sell(0,myExitPrice-FixJump*MinPoint);
}else if(HighestAfterEntry[1] >= EntryPrice + TrailingStart2*MinPoint)// 第一級跟蹤止損的條件表達式? ? ? ? {? ? ? ? ? ? If(Low <= HighestAfterEntry[1] - TrailingStop2*MinPoint)? ? ? ? ? ? {? ? ? ? ? ? ? ? MyExitPrice = Max(Low,HighestAfterEntry[1] - TrailingStop2*MinPoint);? ? ? ? ? ? ? ? myExitPrice = IIF(myExitPrice > Open, Open,myExitPrice); ? ? // 如果該Bar開盤價有跳空觸發，則用開盤價代替? ? ? ? ? ? ? ? Sell(0,MyExitPrice-FixJump*MinPoint);? ? ? ? ? ? }? ? ? ? }else if(HighestAfterEntry[1] >= EntryPrice + TrailingStart1*MinPoint)// 第一級跟蹤止損的條件表達式? ? ? ? {? ? ? ? ? ? If(Low <= HighestAfterEntry[1] - TrailingStop1*MinPoint)? ? ? ? ? ? {? ? ? ? ? ? ? ? MyExitPrice = Max(Low,HighestAfterEntry[1] - TrailingStop1*MinPoint);? ? ? ? ? ? ? ? myExitPrice = IIF(myExitPrice > Open, Open,myExitPrice); ? ? // 如果該Bar開盤價有跳空觸發，則用開盤價代替? ? ? ? ? ? ? ? Sell(0,MyExitPrice-FixJump*MinPoint);? ? ? ? ? ? }? ? ? ? }
}
??
If(MarketPosition ==-1)
{
if(BarsSinceEntry>0 && high>ShortStop)
{
myExitPrice = min(high,ShortStop );
myExitPrice = IIF(myExitPrice < Open, Open,myExitPrice);
BuyToCover(0,myExitPrice+FixJump*MinPoint);
}else if(BarsSinceEntry>0 && high>SellHi) //(XIELV>0)
{
myExitPrice = min(high,SellHi);?
myExitPrice = IIF(myExitPrice < Open, Open,myExitPrice);
BuyToCover(0,myExitPrice+FixJump*MinPoint);
}else if(LowestAfterEntry[1] <= EntryPrice - TrailingStart2*MinPoint)// 第一級跟蹤止損的條件表達式? ? ? ? {? ? ? ? ? ? If(High >= LowestAfterEntry[1] + TrailingStop2*MinPoint)? ? ? ? ? ? {? ? ? ? ? ? ? ? MyExitPrice = min(high,LowestAfterEntry[1] + TrailingStop2*MinPoint);? ? ? ? ? ? ? ? myExitPrice = IIF(myExitPrice < Open, Open,myExitPrice); ? ? // 如果該Bar開盤價有跳空觸發，則用開盤價代替? ? ? ? ? ? ? ? BuyToCover(0,MyExitPrice+FixJump*MinPoint);? ? ? ? ? ? }? ? ? ? }else if(LowestAfterEntry[1] <= EntryPrice - TrailingStart1*MinPoint)// 第一級跟蹤止損的條件表達式? ? ? ? {? ? ? ? ? ? If(High >= LowestAfterEntry[1] + TrailingStop1*MinPoint)? ? ? ? ? ? {? ? ? ? ? ? ? ? MyExitPrice = min(high,LowestAfterEntry[1] + TrailingStop1*MinPoint);? ? ? ? ? ? ? ? myExitPrice = IIF(myExitPrice < Open, Open,myExitPrice); ? ? // 如果該Bar開盤價有跳空觸發，則用開盤價代替? ? ? ? ? ? ? ? BuyToCover(0,MyExitPrice+FixJump*MinPoint);? ? ? ? ? ? }? ? ? ? }
}? ? ? ?
Commentary("TradeNum:"+Text(TradeNum));
Commentary("Time:"+TimeToString(TIME[1]));
end
?
?來源:程序化99
-
文華技術人員：
?WH8是麥語言編寫平臺，直接改寫您的模型是很復雜的
但我們提供MQ軟件，兼容了TB的編寫方式，您模型進行簡單修改，就能在MQ上使用了
您到官網下載mq即可?http://mq.wenhua.com.cn/
代碼如下修改
ParamsNumeric Length1(88); //均線Numeric LEntry(25); //進場M根K線最高點Numeric LSell(48); //進場n根K線最低點Numeric FixXIELV(27); //斜率界定Numeric FixJump(1);Numeric TrailingStart1(10); // 跟蹤止損啟動設置1Numeric TrailingStop1(10); ?// 跟蹤止損設置1Numeric TrailingStart2(100); // 跟蹤止損啟動設置1Numeric TrailingStop2(60); ?// 跟蹤止損設置1Numeric KaiD(-20);?varsNumeric StopPCT; //固定比例止損Numeric XIELV; //MA斜率，用于過濾Numeric KaiK(-40);?NumericSeries MA1; //MA均線，用于過濾信號NumericSeries ShortStop;NumericSeries LongStop;NumericSeries EntryHi; ?NumericSeries EntryLo; ??NumericSeries SellHi;NumericSeries SellLo; ??NumericSeries TradeNum;//記錄信號開始天數Numeric MinPoint; ? // 一個最小變動單位，也就是一跳Numeric MyEntryPrice; ? // 開倉價格，本例是開倉均價，也可根據需要設置為某次入場的價格Numeric MyExitPrice;// 平倉價格NumericSeries HighestAfterEntry;// 開倉后出現的最高價NumericSeries LowestAfterEntry; // 開倉后出現的最低價beginStopPCT=0.1;MinPoint=MinMove*PriceScale;MA1=Summation(Close,Length1)/Length1;PlotNumeric("MA1",MA1);EntryHi = Highest(high[1],LEntry);EntryLo ?= Lowest(low[1],LEntry);SellHi=Highest(high[1],LSell);SellLo= Lowest(low[1],LSell);if (BarStatus==0 || TradeNum >=3){TradeNum = -1;}
if(Time!=Time[1] && tradenum>=0){TradeNum = TradeNum[1]+1;}If(BarsSinceentry == 0){HighestAfterEntry = Close;LowestAfterEntry = Close;If(MarketPosition <> 0){HighestAfterEntry = Max(HighestAfterEntry,AvgEntryPrice); ? // 開倉的Bar，將開倉價和當時的收盤價的較大值保留到HighestAfterEntryLowestAfterEntry = Min(LowestAfterEntry,AvgEntryPrice); // 開倉的Bar，將開倉價和當時的收盤價的較小值保留到LowestAfterEntry}}else{HighestAfterEntry = Max(HighestAfterEntry,High); // 記錄下當前Bar的最高點，用于下一個Bar的跟蹤止損判斷LowestAfterEntry = Min(LowestAfterEntry,Low);// 記錄下當前Bar的最低點，用于下一個Bar的跟蹤止損判斷}Commentary("MAID:"+Text(((High -MA1[1])*10000/MA1[1])-FixXIELV));Commentary("MAIK:"+Text(((Low -MA1[1])*10000/MA1[1])-FixXIELV));if(MarketPosition ==0 and TradeNum<0 ){If( high>EntryHi ?&& (((High -MA1[1])*10000/MA1[1])-FixXIELV) >KaiD )////CrossOver(high,EntryHi) high>MA1 &&{TradeNum = 0;myEntryPrice = min(high,EntryHi );myEntryPrice = IIF(myEntryPrice < Open, Open,myEntryPrice);?Buy(0,myEntryPrice+FixJump*MinPoint);LongStop=Max(Highest(low[1],2),myEntryPrice*(1-StopPCT/100));}If( Low<EntryLo ?&& (((Low -MA1[1])*10000/MA1[1])+FixXIELV)< KaiK) ////CrossUnder(Low,EntryLo) ?low <MA1 ?&&{TradeNum = 0;myEntryPrice = max(low,EntryLo ?);myEntryPrice = IIF(myEntryPrice > Open, Open,myEntryPrice);?SellShort(0,myEntryPrice-FixJump*MinPoint);ShortStop= Min(Lowest(high[1],2),myEntryPrice*(1+StopPCT/100));}}If(MarketPosition ==1){if (BarsSinceEntry>0 && Low<LongStop){
myExitPrice = max(low,LongStop );
myExitPrice = IIF(myExitPrice > Open, Open,myExitPrice);
Sell(0,myExitPrice-FixJump*MinPoint);
}else if (BarsSinceEntry>0 && Low<SellLo) //(XIELV<0)
{
myExitPrice = max(low,SellLo );
myExitPrice = IIF(myExitPrice > Open, Open,myExitPrice);
Sell(0,myExitPrice-FixJump*MinPoint);
}else if(HighestAfterEntry[1] >= EntryPrice + TrailingStart2*MinPoint)// 第一級跟蹤止損的條件表達式{If(Low <= HighestAfterEntry[1] - TrailingStop2*MinPoint){MyExitPrice = Max(Low,HighestAfterEntry[1] - TrailingStop2*MinPoint);myExitPrice = IIF(myExitPrice > Open, Open,myExitPrice); // 如果該Bar開盤價有跳空觸發，則用開盤價代替Sell(0,MyExitPrice-FixJump*MinPoint);}}else if(HighestAfterEntry[1] >= EntryPrice + TrailingStart1*MinPoint)// 第一級跟蹤止損的條件表達式{If(Low <= HighestAfterEntry[1] - TrailingStop1*MinPoint){MyExitPrice = Max(Low,HighestAfterEntry[1] - TrailingStop1*MinPoint);myExitPrice = IIF(myExitPrice > Open, Open,myExitPrice); // 如果該Bar開盤價有跳空觸發，則用開盤價代替Sell(0,MyExitPrice-FixJump*MinPoint);}}}If(MarketPosition ==-1){if(BarsSinceEntry>0 && high>ShortStop){myExitPrice = min(high,ShortStop );myExitPrice = IIF(myExitPrice < Open, Open,myExitPrice);BuyToCover(0,myExitPrice+FixJump*MinPoint);}else if(BarsSinceEntry>0 && high>SellHi) //(XIELV>0){myExitPrice = min(high,SellHi);?myExitPrice = IIF(myExitPrice < Open, Open,myExitPrice);BuyToCover(0,myExitPrice+FixJump*MinPoint);}else if(LowestAfterEntry[1] <= EntryPrice - TrailingStart2*MinPoint)// 第一級跟蹤止損的條件表達式{If(High >= LowestAfterEntry[1] + TrailingStop2*MinPoint){MyExitPrice = min(high,LowestAfterEntry[1] + TrailingStop2*MinPoint);myExitPrice = IIF(myExitPrice < Open, Open,myExitPrice); // 如果該Bar開盤價有跳空觸發，則用開盤價代替BuyToCover(0,MyExitPrice+FixJump*MinPoint);}}else if(LowestAfterEntry[1] <= EntryPrice - TrailingStart1*MinPoint)// 第一級跟蹤止損的條件表達式{If(High >= LowestAfterEntry[1] + TrailingStop1*MinPoint){MyExitPrice = min(high,LowestAfterEntry[1] + TrailingStop1*MinPoint);myExitPrice = IIF(myExitPrice < Open, Open,myExitPrice); // 如果該Bar開盤價有跳空觸發，則用開盤價代替BuyToCover(0,MyExitPrice+FixJump*MinPoint);}}}Commentary("TradeNum:"+Text(TradeNum));Commentary("Time:"+TimeToString(TIME[1]));end?
?來源: www.kzuj.com.cn
-
文華客服：
?想改成WH8麥語言的 ? 這個TB的交易方式不是很穩定 我實際運行的時候和回測的時候價格老是不一致
?
-
網友回復：
?MQ（wh9）的回測運行機制和wh8一樣的，只是模型語言不一樣。
回測和運行的一致性，和wh8也是一樣的，請放心使用
?
-
網友回復：
?我加載到MQ里沒有交易?
?但是我在TB里是有的
打印本文
關閉窗口