指標公式源碼分析及使用參考說明:

?

?

源碼：

{[簡睿角力]--飛狐版--loy518改---“壹瓣杺埖”原創(chuàng)}{纏論高低點}
局部低點預選A:=BACKSET(LLV(L,5)<REF(LLV(L,4),1),4);
局部低點預選B:=BACKSET(局部低點預選A=0 AND REF(局部低點預選A,1)=1,2);
局部低點預選C:=IF(局部低點預選B=1 AND REF(局部低點預選B,1)=0,-1,0);
局部高點預選A:=BACKSET(HHV(H,5)>REF(HHV(H,4),1),4);
局部高點預選B:=BACKSET(局部高點預選A=0 AND REF(局部高點預選A,1)=1,2);
局部高點預選C:=IF(局部高點預選B=1 AND REF(局部高點預選B,1)=0,1,0);
缺口判斷:=IF(L>REF(H,1),1,IF(H<REF(L,1),-1,0));
距前高天:=BARSLAST(局部高點預選C=1);
距前低天:=BARSLAST(局部低點預選C=-1);
{小值周期:LOWRANGE(L),NODRAW;
大值周期:TOPRANGE(H),NODRAW;}
最低:=L;
低價:=最低[SYSPARAM(1)];
最高:=H;
高價:=最高[SYSPARAM(1)];
小值周期:BARSLAST(L<低價)-1,LINETHICK;
大值周期:BARSLAST(H>高價)-1,LINETHICK;低保留AA:=IF(局部低點預選C=-1 AND REF(距前高天,1)>REF(距前低天,1) AND LLV(L,距前高天+1)<REF(LLV(L,距前高天+1),1),-1,0);
低保留AB:=IF(局部低點預選C=-1 AND REF(距前高天,1)<=REF(距前低天,1) AND (距前高天>=4 OR LLV(缺口判斷,距前高天)=-1 OR LLV(L,距前低天+2)<REF(LLV(L,距前低天+1),1)),-1,0);
低保留S:=IF((低保留AA=-1 OR 低保留AB=-1) AND L<REF(H,距前高天+1),-1,0);
預判:=IF((距前低天<4 AND HHV(缺口判斷,距前低天)<>1) OR REF(低保留S,距前低天)=0,1,0);
判斷:=IF(局部高點預選C=1 AND REF(距前低天,1)<=REF(距前高天,1) AND 預判=1 AND 大值周期>REF(小值周期,距前低天+1) AND 大值周期>REF(小值周期,距前低天) AND 大值周期>REF(大值周期,距前高天),1,0);
高保留A:=IF(局部高點預選C=1 AND REF(距前低天,1)>REF(距前高天,1) AND HHV(H,距前低天+1)>REF(HHV(H,距前低天+1),1),1,0);
高保留B:=IF(局部高點預選C=1 AND REF(距前低天,1)<=REF(距前高天,1) AND REF(低保留S,距前低天)=-1 AND (距前低天>=4 OR HHV(缺口判斷,距前低天)=1),1,0);
高保留:=IF((高保留A=1 OR 高保留B=1 OR 判斷=1) AND H>REF(L,距前低天+1),1,0);
預判A:=IF((距前高天<4 AND HHV(缺口判斷,距前高天)<>1) OR REF(高保留,距前高天)=0,1,0);
判斷A:=IF(局部低點預選C=-1 AND REF(距前高天,1)<=REF(距前低天,1) AND 預判A=1 AND 小值周期>REF(大值周期,距前高天+1) AND 小值周期>REF(大值周期,距前高天) AND 小值周期>REF(小值周期,距前低天),-1,0);
低保留A:=IF(局部低點預選C=-1 AND REF(距前高天,1)>REF(距前低天,1) AND LLV(L,距前高天+1)<REF(LLV(L,距前高天+1),1),-1,0);
低保留B:=IF(局部低點預選C=-1 AND REF(距前高天,1)<=REF(距前低天,1) AND (距前高天>=4 OR LLV(缺口判斷,距前高天)=-1 OR 判斷A=-1),-1,0);
低保留:=IF((低保留A=-1 OR 低保留B=-1) AND L<REF(H,距前高天+1),-1,0);
距前高天A:=BARSLAST(高保留=1);
距前低天A:=BARSLAST(低保留=-1);
預判X:=IF((距前低天A<4 AND HHV(缺口判斷,距前低天A)<>1) OR REF(低保留,距前低天A)=0,1,0);
判斷X:=IF(局部高點預選C=1 AND REF(距前低天A,1)<=REF(距前高天A,1) AND 預判X=1 AND 大值周期>REF(小值周期,距前低天A+1) AND 大值周期>REF(小值周期,距前低天A) AND 大值周期>REF(大值周期,距前高天A),1,0);
高保留XA:=IF(局部高點預選C=1 AND REF(距前低天A,1)>REF(距前高天A,1) AND HHV(H,距前低天A+1)>REF(HHV(H,距前低天A+1),1),1,0);
高保留XB:=IF(局部高點預選C=1 AND REF(距前低天A,1)<=REF(距前高天A,1) AND REF(低保留,距前低天A)=-1 AND (距前低天A>=4 OR HHV(缺口判斷,距前低天A)=1),1,0);
高保留X:=IF((高保留XA=1 OR 高保留XB=1 OR 判斷X=1) AND H>REF(L,距前低天A+1),1,0);
預判XA:=IF((距前高天A<4 AND HHV(缺口判斷,距前高天A)<>1) OR REF(高保留XA,距前高天A)=0,1,0);
判斷XA:=IF(局部低點預選C=-1 AND REF(距前高天A,1)<=REF(距前低天A,1) AND 預判XA=1 AND 小值周期>REF(大值周期,距前高天A+1) AND 小值周期>REF(大值周期,距前高天A) AND 小值周期>REF(小值周期,距前低天A),-1,0);
低保留XA:=IF(局部低點預選C=-1 AND REF(距前高天A,1)>REF(距前低天A,1) AND LLV(L,距前高天A+1)<REF(LLV(L,距前高天A+1),1),-1,0);
低保留XB:=IF(局部低點預選C=-1 AND REF(距前高天A,1)<=REF(距前低天A,1) AND (距前高天A>=4 OR LLV(缺口判斷,距前高天A)=-1 OR 判斷XA=-1),-1,0);
低保留X:=IF((低保留XA=-1 OR 低保留XB=-1) AND L<REF(H,距前高天A+1),-1,0);
距前高天YA:=BARSLAST(高保留X=1);
距前低天YA:=BARSLAST(低保留X=-1);
預判YX:=IF((距前低天YA<4 AND HHV(缺口判斷,距前低天YA)<>1) OR REF(低保留X,距前低天YA)=0,1,0);
判斷YX:=IF(局部高點預選C=1 AND REF(距前低天YA,1)<=REF(距前高天YA,1) AND 預判YX=1 AND 大值周期>REF(小值周期,距前低天YA+1) AND 大值周期>REF(小值周期,距前低天YA) AND 大值周期>REF(大值周期,距前高天YA),1,0);
高保留YXA:=IF(局部高點預選C=1 AND REF(距前低天YA,1)>REF(距前高天YA,1) AND HHV(H,距前低天YA+1)>REF(HHV(H,距前低天YA+1),1),1,0);
高保留YXB:=IF(局部高點預選C=1 AND REF(距前低天YA,1)<=REF(距前高天YA,1) AND REF(低保留X,距前低天YA)=-1 AND (距前低天YA>=4 OR HHV(缺口判斷,距前低天YA)=1),1,0);
高保留YX:=IF((高保留YXA=1 OR 高保留YXB=1 OR 判斷YX=1) AND H>REF(L,距前低天YA+1),1,0);
預判YXA:=IF((距前高天YA<4 AND HHV(缺口判斷,距前高天YA)<>1) OR REF(高保留YXA,距前高天YA)=0,1,0);
判斷YXA:=IF(局部低點預選C=-1 AND REF(距前高天YA,1)<=REF(距前低天YA,1) AND 預判YXA=1 AND 小值周期>REF(大值周期,距前高天YA+1) AND 小值周期>REF(大值周期,距前高天YA) AND 小值周期>REF(小值周期,距前低天YA),-1,0);
低保留YXA:=IF(局部低點預選C=-1 AND REF(距前高天YA,1)>REF(距前低天YA,1) AND LLV(L,距前高天YA+1)<REF(LLV(L,距前高天YA+1),1),-1,0);
低保留YXB:=IF(局部低點預選C=-1 AND REF(距前高天YA,1)<=REF(距前低天YA,1) AND (距前高天YA>=4 OR LLV(缺口判斷,距前高天YA)=-1 OR 判斷YXA=-1),-1,0);
低保留YX:=IF((低保留YXA=-1 OR 低保留YXB=-1) AND L<REF(H,距前高天YA+1),-1,0);
AAAD:=IF(高保留YX=1 AND 低保留YX=-1 AND H>REF(H,REF(距前高天YA,1)+2),1,IF(高保留YX=1 AND 低保留YX=-1 AND L<REF(L,REF(距前低天YA,1)+2),-1,0));
極點保留:=IF(AAAD=0,高保留YX+低保留YX,AAAD);
XA:=LINEVALUE(極點保留=-1,L,REF(極點保留,1)=-1,REF(L,1),0,0);
XB:=LINEVALUE(極點保留=1,H,REF(極點保留,1)=1,REF(H,1),0,0);
XAS:=LINEVALUE(極點保留=-1,XB,REF(極點保留,1)=-1,REF(XB,1),0,0);
XBS:=LINEVALUE(極點保留=1,XA,REF(極點保留,1)=1,REF(XA,1),0,0);
XA45:=(XA+XAS)/2; XB45:=(XB+XBS)/2;
XA63:=(XAS-XA)*3/4+XA; XB63:=XB-(XB-XBS)*3/4;//DRAWBAND(XA45,RGB(0,150,100),XA63,RGB(0,150,100));
FILLRGN(XA45>XA63,XA45,XA63),Color649600;
FILLRGN(XA45<XA63,XA45,XA63),COLOR649600;
//DRAWBAND(XB45,RGB(185,96,9),XB63,RGB(185,96,9));
FILLRGN(XB45>XB63,XB45,XB63),Color0960B9;
FILLRGN(XB45<XB63,XB45,XB63),COLOR0960B9;局部極點:IF(極點保留=-1,L,IF(極點保留=1,H,0)),CIRCLEDOT,COLORYELLOW,LINETHICK;
PARTLINE(極點保留=-1,L),CIRCLEDOT,COLORYELLOW,LINETHICK5;
PARTLINE(極點保留=1,H),CIRCLEDOT,COLORYELLOW,LINETHICK5;
壓1:IF(BETWEEN(XA45,XB45,XB63),XA45,0),COLOR008800,LINETHICK;
PARTLINE(BETWEEN(XA45,XB45,XB63),XA45),COLOR008800;
壓2:IF(BETWEEN(XA63,XB45,XB63),XA63,0),COLOR008800,LINETHICK;
PARTLINE(BETWEEN(XA63,XB45,XB63),XA63),COLOR008800;
KLINE(O,H,L,C,0);

?

公式導入教程: 【通達信公式源碼導入方法教程】 【同花順公式源碼導入方法教程】 【大智慧新一代公式源碼導入方法教程】

?